Fabrication and characteristics of self‐aggregation nanoparticles used for conformance control treatment

In order to alleviate the contradiction between injectability of the profile control agent and its profile control performance, a novel core‐shell heterogeneous structure colloidal particles (CSA) were synthesized, and the mechanism of self‐aggregation plugging was proposed. Cross‐linking inside the nanoparticles and chain‐growth polymerization via capturing acrylamide in the aqueous phase result in the formation of core‐shell heterogeneous structures as proved by TEM observation and XPS analysis. Moreover, CSA nanoparticles exhibit good hydrophilic properties, outstanding thermal stability and limited expansion capacity. Effects of different metal cations and surface group on the self‐aggregation time of CSA nanoparticles were systematically studied. Results showed that divalent cations contributed to more significant aggregation of CSA nanoparticles in comparison to monovalent cations. The increasing cations concentration and valency decreased the thickness of electric double layer, which lead to a decrease in the zeta potential. Core flooding test shows that the injection of nanoparticles which diameter is much smaller that of pore‐throats into the target reservoir can not only successfully enter the depth of porous media, but also effectively block the high permeability areas by the formation of self‐aggregation particle clusters. This study provides a new method for the equilibrium between nanoparticles injectivity and in‐depth profile control of nanoparticles.     

考虑底部隆起的浅埋隧道围岩压力计算分析

针对浅埋隧道开挖后底部隆起变形现象,应用极限分析上限法构造了考虑底部隆起变形的围岩压力计算模型,结合线性Mohr-Coulomb准则等推导出极限围岩压力的理论表达式。通过约束条件将围岩压力的计算转化为数学中的最优化问题,编制程序进行了优化计算。将计算结果与工程实测数据及文献计算结果进行了对比,验证了当前方法的可靠性。同时,指出在运用极限分析法处理浅埋隧道围岩压力问题过程中应将隧道底部一同考虑,对隧道底部支护会对整个围岩压力产生影响,有助于隧道结构的整体稳定。研究可以为浅埋隧道的开挖、支护提供一定的理论指导.     

SIMS depth profiling of ‘frozen’ samples: in search of ultimate depth resolution regime

We have performed secondary ion mass spectrometry depth profiling analysis of III–V based hetero‐structures at different target temperatures and found that both the surface segregation and surface roughness caused by ion sputtering can be radically reduced if the sample temperature is lowered to ?150 °C. The depth profiling of ‘frozen’ samples can be a good alternative to sample rotation and oxygen flooding used for ultra‐low‐energy depth profiling of compound semiconductors. Copyright © 2016 John Wiley & Sons, Ltd.     

Effect of SIMS ionization probability on depth resolution for organic/inorganic interfaces

Secondary ion mass spectrometry (SIMS) relies on the fact that surface particles ejected from a solid surface are ionized under ion bombardment. By comparing the signal of molecular secondary ions desorbed from an organic film with that of the corresponding sputtered neutral precursor molecules, we investigate the variation of the molecular ionization probability when depth profiling through the film to the substrate interface. As a result, we find notable variations of the ionization probability both at the original surface and in the interface region, leading to a strong distortion of the measured SIMS depth profile. The experiments show that the effect can act in two ways, leading either to an apparent broadening or to an artificial sharpening of the observed film‐substrate transition. As a consequence, we conclude that care must be taken when assessing interface location, width, or depth resolution from a molecular SIMS depth profile.     

阵不变量匹配主动声呐目标深度辨识

水面/水下目标深度辨识可以在主动声呐探测过程中快速筛选感兴趣目标。根据目标多径返回信号到达时间与目标深度的关联性,该文提出了基于水平线阵的主动脉冲响应匹配目标深度辨识方法,该方法利用主动信号传播特性结合阵不变量理论提取脉冲响应,并与拷贝声场匹配实现目标深度估计。在校正了目标多径回波的方位变化后,该方法提取的时域特征较为稳定,并且只在时延估计距离处进行深度搜索。通过水平阵收集的宽带实验数据,在连续的多次回波中实现了对水面/水下目标92%的辨识成功率,验证了该方法在浅海环境下的目标深度估计能力。     

Study on the nanoscale current of ZnO film by photoassisted peak force tunnel atomic force: A novel technique for UV detection

ZnO film-based ultraviolet (UV) detector was fabricated by photoassisted peak force tunnel atomic force (PFTUNA) on fluorine tin oxide (FTO) substrate. The PFTUNA current in dark and in UV light was ~0.1 and 2.0 nA, respectively. The UV sensitivity (photocurrent/dark current) is more than 20. The response time and the recovery time are ~0.12 and 0.32 s, respectively. The UV sensing mechanism is that the holes will transport to the ZnO surface to capture the adsorbed oxygen ions to weaken the depletion layer under UV illumination. The PFTUNA current between the tip and the ZnO film is consistent with the Richardson–Schottky (RS) thermionic emission model.     

杭州大剧院风压分布的风洞试验研究

杭州大剧院外观造型新颖独特，由一个近似为椭球的双曲面屋盖和一个倒置的圆锥面玻璃幕墙相交形成大剧院的主体建筑的外轮廓．本文结合该主体结构的抗风设计要求，制作了1：200刚性模型进行结构表面脉动风压平均风压分布的风洞试验研究，详细介绍了风洞试验及数据处理方法，讨论了在不同风向角下椭球面屋盖和圆锥面玻璃幕墙的风压分布．为了便于整体结构设计，本文根据结构的实际情况对椭球面和圆锥面进行分块并给出相应的分块风压数据，最后根据各风向角下的风压分布特征给出了整体结构抗风设计的最不利风向角．     

THEORETICAL AND EXPERIMENTALRESEARCH ON DYNAMIC BEHAVIOR OF GUYED MASTS UNDER WIND LOAD

I. INTRODUCTION Wind-induced vibration is the critical factor for the safety of guyed masts. Many dynamic modelshave been proposed in the literature[1 , 2]. However, there are obvious de?ciencies in many of theseprevious works owing to the poor cabl…     

低速风洞微机控制闭环调速

本文提出一种用于调节低速风洞流速的测量及控制系统。该系统以微计算机为核心,不断采集风洞实验段的流速数据,并根据测量结果与指定值的比较去调节和控制风洞的电机转速,使风洞能准确地按指定风速运行或按予定的程序升速或降速,实现了低速风洞的闭环自动调速。本文给出了该系统的构成原理和性能实验结果。测试结果表明,本系统的超调量小于5％,稳态误差小于0.3％,调节时间小于50秒。     

等熵轻质活塞风洞中活塞质量对匹配压力振荡的影响

等熵轻质活塞风洞的管道中被压缩的气体是作为实验段的气源，在实验阶段，要求其压力维持恒值，称此压力为匹配压力，这一条件只有在忽略活塞质量的理想情况下才可实现，本文研究在实际情况下，即考虑活塞质量时，质量对匹配压力振荡的影响，从而得出活塞质量的选择范围。